Government Surplus 5 - Discount Outdoor Gear

SAVE BIG!

Click images to enlarge...
	Angle-adjust, and 360° swivel.

It secures firmly to any workbench or table up to 21¹/4" thick and has soft rubber grips that securely hold your work without marring it. Head swivels 360° and locks at any angle. 3¹/8" jaws hold items up to 2¹/4" wide. Super-tough cast aluminum body. Weighs approx. 3 lbs.

Get yours ONLINE today!

SAVE BIG!

Click images to enlarge...

And no more trying to balance it while you pump it either. The Pump & Fill is the easy and convenient way to dispense gas, or a variety of other fluids like diesel, kerosene, #1 and #2 furnace oil, water, wine, home brewed beer, the list goes on and on, without messy spills.

It even pumps liquid up hill. It's a "positive pressure liquid transfer and removal" by a hand and a foot manual operation. The hand-operated nozzle is connected to the 5' fuel line. The foot operated pump is part of the 3' air line. Plus you get a fuel tank adapter to connect the lines to the fuel tank (not included). Weighs under 1 lb.

Ideal for your ATV, snowmobile, chain saws, tractors, generators, boats, motorcycles, cars and trucks, snow blowers, you name it. Act ONLINE Now!

• 2 multi-size cup holders
• Storage compartment for 7' power cord
• Auto on / off temperature control
• Removable / adjustable shoulder strap
• Weighs 10 lbs.
• Draws approx. 4 amps (48 watts)
• Measures 9 x 16 x 13"h.

SAVE BIG!

Razor-sharp, high tooth design for detailing / less sanding. Get the most out of your 10" miter, table, radial arm or compound saws with this 3-piece Carbide Detail Blade Set. All feature tough carbide tips, thin kerfs, near-perfect balance and razor-sharp grind. You get an energy-saving 60-tooth fine Blade... the ultimate cut-off for any compound miter saw, radial arm or table saw. The 80-tooth super fine and 120-tooth ultra-fine Blades have a slight hook style carbide design for superior cutting of laminates, melamines, synthetics, plus hard and soft woods.

Nab your trio ONLINE now!

Jump right on this brand-spanking-new deal... Order ONLINE Now for yours!

• Patent-pending telescoping design... "Xtends and locks by the foot^™" from 1 ¹/2' to 12 ¹/2'
• Strong 6061 aluminum alloy construction meets ANSI Type II safety, duty-rated up to 225 lbs.
• 13 rungs, each is 19" wide
• Integrated carry handle
• Super-portable 2 ¹/2' closed. Weighs 25 lbs.

PRICED TO OWN!

Click images to enlarge...

ANSI-compliant Auto Darkening Helmet

120V or 220V, both premium and fully ready to go!

• For gasless welding, easily converts for gas operation
• Solid state electronic heat controls with PC board for wire speed control
• Welds steel, aluminum, cast iron and stainless steel with special flux-core wire that produces its own gas shroud
• Professional "non-live" torch with full on / off safety control
• Fan cooled for longer use at full output and longer life
• Thermal overload protection
• Uses 2-lb. or 11-lb. wire spools
• Approx. 18 x 9 ³/4 x 12 ³/4". CSA-approved safety.

• Heavy-duty steel cart
• Full-face helmet
• .023 MIG wire and .035 flux-core wire
• 2-gauge regulator
• Extra contact tips
• Instructional video
• Wire brush and hammer.

• 130-amp max. unit welds mild steel up to ³/16" thick in one pass
• Standard protective helmet
• 120V household plug-in
• 4 heat settings
• 53 lbs.

• 180-amp max. unit welds mild steel up to ¹/4" thick in one pass
• Deluxe solar-powered auto-darkening helmet with battery backup, infinite lens adjustment, large 1 ¹/2 x 3 ¹/2" viewing area and internal manual on / off switch
• Plugs into standard 220V outlet
• 6 voltage settings for accurate heat control
• Weighs 64 lbs.

Order ONLINE Today!

Yep, the math is that easy... ONE low price for 12 quality woodworking Chisels! And believe me, they're worth many times that price. The 4" blades are forged from C45 high-carbon steel, with 3 ³/4" wood handles, reinforced with ferrules at the shank for durability (no "mushrooming"). Chisels / gouges for both carving and lathe use included.

These make the cut:

• ¹/2" and ¹/4" standard blade
• ¹/4" round nose
• ¹/4" square wood-turning
• ¹/4" skew wood-turning
• ¹/4" diamond point
• ¹/4" curved
• ¹/4" "U" gouge
• ¹/2" wood-turning gouge
• ¹/2" and ⁹/16" straight gouges
• ¹/2" parting tool
• All in a convenient roll pouch for storage.

This is a flat-out no-brainer deal... get yours ONLINE right now!

12-pc. Chisel Set

These make the cut:

• ¹/2" and ¹/4" standard blade
• ¹/4" round nose
• ¹/4" square wood-turning
• ¹/4" skew wood-turning
• ¹/4" diamond point
• ¹/4" curved
• ¹/4" "U" gouge
• ¹/2" wood-turning gouge
• ¹/2" and ⁹/16" straight gouges
• ¹/2" parting tool
• All in a convenient roll pouch for storage.

Go ahead. Order ONLINE today to put extreme pull-power at your fingertips!

• 6,000-lb. rolling load, 5,000-lb. marine load, 2,000-lb. pulling capacity
• 30' aircraft cable with attached 3 ³/4" steel hook
• Line speed is 6 ft.-min. with load
• Slotted mounting plate fits over hitch ball
• Emergency hand crank alternative
• 9'9" remote cable switch with water-sealed plug for safe operation
• 16' long power cord with water-sealed plug and circuit breaker
• Convenient portable power for pulling boats, stuck vehicles and heavy items
• Built-in carry handle and quick-attach mounting plate
• Measures 9 ¹/2 x 7 ¹/2 x 10", weighs 18 ¹/2 lbs.

• 1,500-lb. single line pulling, stall load of 1,950 lbs.
• Freespool clutch disengages the gearbox to allow wire rope to be manually pulled out
• Includes 25' of ⁵/32" aircraft cable wire rope with attached hook
• Remote switch allows for a wide variety of mounting options
• No-load speed of 16 ¹/2 ft.-min.
• Gear ratio 153:1
• Measures 12 ¹/2 x 4 ¹/8", weighs 14 ¹/2 lbs.

Coffee's on:

• Plugs into your car's cigarette lighter or any other 12-volt power source
• Brews up to 5 cups of fresh, hot coffee in just minutes
• Built-in thermostat prevents overheating
• Tempered glass carafe keeps your coffee hot.

SAVE BIG!

Click images to enlarge...

These Hole Saws stay sharper longer than carbon steel models because of the tougher high-speed alloy cutting teeth. They bite through wood, metal and plastic with ease.

Includes:

• 11 sizes... ³/4", ⁷/8", 1", 1 ¹/4", 1 ³/8", 1 ¹/2", 1 ³/4", 2", 2 ¹/4", 2 ¹/2", 3"
• 2 mandrels... 2 ¹/16" and 2 ¹/4" cutting depths
• Weighs 4 lbs., 12 ozs. with 13 ¹/2 x 8 ³/4 x 2 ³/4" plastic organizer case.

Order ONLINE Today!

Top-notch:

• USA-made Jacobs^{® 3}/8" drive keyless chuck
• 16 torque settings, plus direct drive
• 0-900 rpm no-load variable speed
• Electric brake
• Forward, lock, reverse trigger switch
• 3-hour rapid charger stand
• Includes 6 M2 drill bits, 4 Phillips bits, 2 slotted bits and 1 combo bit
• Molded plastic carry case is 14 x 10 x 3 ¹/2"
• Drill weighs 3 lbs., set is 8 ¹/4 lbs.

Can be manually adjusted up or down. Plastic housing. Takes 2 AA batteries (not included). Measures 5 ⁵/16 x 2 x 7"; base is 4 ¹/2" h. Weighs 8 ozs. with batteries.

Great if you live alone, have a family to protect or just want a little extra security. Get 2, one for the front and one for the back.

Order ONLINE Now!

Each features:

• Over / under-voltage protection... automatically shuts off when input exceeds 15 volts or dips below 9.7
• Circuit breaker shuts off until shorts are fixed
• Overload protection and thermal protection for safety
• Low-voltage alarm when your battery dips below 10.3 volts (and the auto shut-off will kick in after that).

Choose the model that suits your power needs... see the table for some examples.

Set to go:

• 51 titanium-coated HSS drill bits, from ¹/32" to ⁵/16"
• 11 masonry drill bits, from ¹/8" to ²⁵/64"
• 42 black-finished HSS drill bits, from ¹/32" to ²⁵/64"
• 3 long 11 ⁷/8" masonry drill bits, from ⁵/16" to ¹⁵/32"
• 8 wood boring drill bits, from ⁵/32" to ²⁵/64"
• 6 wood flat bits, from ¹/2" to 1 ¹/4"
• 4-11 ⁷/8" long type wood flat bits, from ⁵/15" to 3 ⁵/64"
• 20-2" screwdriver bits; slotted ¹/8"-⁵/16", Phillips #1-#3, starburst #1-#3, T10-T45
• 27-1 pc. screwdriver bits; slotted ¹/8"-⁵/15", Phillips #1-#3, starburst #1-#3, T10-T45, ¹/8"-¹⁵/64", #1-#3
• Bit holder
• 10 nut drivers, ¹³/64" to ³³/64"
• 3 drill stoppers, ¹/8" to ⁵/16"
• Allen key
• Countersink
• 4 hole saws, 1 ¹/4" to 2 ¹/8"
• Hole saw adapter
• 3 screw finders
• Drill gauge
• Center punch
• 3 cupped nailsets ²/32" to ⁴/32".

If this set doesn't have it, it may not exist! Order ONLINE Now!

Both include:

• Heavy duty Frames constructed of 18-gauge powder-coated 2" steel tubing. This is tough, commercial-grade stuff!
• Super-durable Covers constructed of heavy duty rip-stop polyethylene with a 8 oz. 18 mm double laminate vinyl coating. Tough, strong, totally waterproof and UV-resistant to protect against sun, rain, snow, hail, dirt, dust, sap and more
• Unique Cover Tension System that makes installation easy and allows you to tighten the cover and easily adjust the tension once the Garage is assembled
• Heavy duty zippers that open from both inside and outside the Garage
• Solid back panels

• Measures 22 x 20 x 10'... perfect for two cars, one car and several ATVs, your pop-up camper and boat... many combinations possible. Makes a great instant workshop, too!
• Triple-zip front door allows you to enter from either side, and allows one side to be down while the other is up
• No tools required for assembly. Average set-up time for 2-3 people is 8-10 hours. Yeah, it's a days work, but it's well worth the effort!
• Includes 16 - 15" auger anchors with cable ties rated to 1200 lbs.for securing to ground. Strong enough to withstand high winds and rough weather
• Ships in 3 boxes, overall weight is 600 lbs.

• Measures 14 x 46 x 16'... ideal for your RV or large boat.
• Double-zip front door allows you to enter from either side
• No tools required for assembly. Average set-up time for 2-3 people is 8-10 hours. Yeah, it's a days work, but it's well worth the effort!
• Includes 16 - 15" auger anchors with cable ties rated to 1200 lbs. for securing to ground. Strong enough to withstand high winds and rough weather
• Ships in 3 boxes, overall weight is 1,525 lbs.

Please Note: These items are shipped directly from the factory. Please allow an extra 2-4 weeks for delivery... sorry no express shipping available.

Please Note: This is a Heavy / Bulky item. $260.00 for heavy / bulky shipping and handling will be charged in addition to regular shipping and handling. Shipped by commercial carrier curbside. Unloading off the back of the truck is included in the shipping charge.

Please Note: This is a Heavy / Bulky item. $430.00 for heavy / bulky shipping and handling will be charged in addition to regular shipping and handling. Shipped by commercial carrier curbside. Unloading off the back of the truck is included in the shipping charge.